路博润Lanco TF 1370LF蜡粉
“路博润Lanco TF 1370LF蜡粉”参数说明
| 品名： | 化学添加剂 | 形态： | 粉状 |
| 型号： | 1370LF | 规格： | 20KG/包 |
| 包装： | 20KG/包 |
“路博润Lanco TF 1370LF蜡粉”详细介绍
LANCO? 1370 LF
Modified polypropylene wax, micronized and classified
Applications ? Wood coatings
? UV and electron beam curing coatings
? Industrial coatings
? Foil Coatings
? Coil Coatings
? Varnishes
based on:
? Acrylics
? Polyurethanes
? Alkyds
? N/C and N/C combination finishes
? Polyesters
Performance Lanco 1370 LF is a readily dispersible wax with a high melting range and
excellent toughness. This additive shows a high hardness in combination
with matting efficiency and an especially good resistance againt
burnishing. Because it contains no halogens, Lanco 1370 LF can also be
employed in areas where PTFE/ PE waxes cannot be used.
In the above mentioned coatings, Lanco 1370 LF provides the following
characteristics:
? Excellent scratch and abrasion resistance
? Very good resistance against burnishing
? Uniform matting with smooth surface feel
? Reduction of coefficient of friction
? Antiblocking properties due to the high melting point
Incorporation Lanco 1370 LF is very easily dispersible. It can be incorporated using
normal stirrers. In very low viscosity systems high shear mixers such as
dissolvers or bead mills may be re东莞市首聚贸易： 黄先生uired.
For production of pastes, the concentration range of the wax should be
approx. 25-30%.
LANCO? 1370 LF
Page 2
Addition levels To improve surface properties such as scratch resistance and slip, the
recommended addition rate is 0.1 to 2.5% Lanco 1370 LF, based on the
total formulation.
For matting a combination of Silica/ Lanco 1370 LF in a ratio of 1:1 to 4:1
can be used. The addition rate of wax should be 1 to 5% based on the
total formulation.
Appearance free-flowing white powder
Chemical type modified polypropylene wax
Particle size, max.(μm)
(Cilas Laser Diffraction)
Dv50 9
Dv90 18
Melting point (°C) 150
Density (g/cm3) 0.93
Acid value (mg KOH/g) <1,5
编辑：成都首聚贸易有限公司 时间：2018/05/11
上一条：暂时没有！